From 2186d5f3f95cd74a070a490d899291648d58667a Mon Sep 17 00:00:00 2001 From: Steven Fuller Date: Sun, 1 Jul 2001 00:55:22 +0000 Subject: Initial revision --- 3dc/win95/DB.H | 363 --------------------------------------------------------- 1 file changed, 363 deletions(-) delete mode 100644 3dc/win95/DB.H (limited to '3dc/win95/DB.H') diff --git a/3dc/win95/DB.H b/3dc/win95/DB.H deleted file mode 100644 index 10e5d4d..0000000 --- a/3dc/win95/DB.H +++ /dev/null @@ -1,363 +0,0 @@ -/* ******************************************************************** * - * * - * DB.H - Header for debugging functions and macros. * - * * - * By: Garry Lancaster Version: 2.0 * - * * - * ******************************************************************** */ - -/* N O T E S ********************************************************** */ - -/* Define NDEBUG here to switch off all debugging. */ - -/* Set the DB_LEVEL here or before this file is included. Most db macros - * have a level from 1 to 5. They - * will only compile to code if the DB_LEVEL is at or greater than their - * level, otherwise they will be translated to ((void) 0) (i.e. no - * code.). The levels should be used as follows: - * - * 1 - Very low cost debugging. Negligible speed penalty. Could easily - * be left in a finished game. - * 2 - Low cost debugging. Small speed penalty. Use during development - * for well-tested code. - * 3 - Medium cost debugging. Obvious but tolerable speed penalty. Use - * during development most of the time. - * 4 - High cost debugging. Large speed penalty. Use during development - * when actively bug hunting. - * 5 - Very high cost debugging. Massive speed penalty. Use when trying - * to track down one of THOSE bugs. - * - * The level of a macro is part of its name e.g. to code a db_assert - * that fires at level 3 or above, use db_assert3(). - */ - -#pragma once - -/* If you do not set the DB_LEVEL, it is set for you: to 3 */ -#ifndef DB_LEVEL - #define DB_LEVEL 3 -#endif - -/* N.B. If NDEBUG is set, it over-rides DB_LEVEL and switches off all - * debugging. - */ -#ifdef NDEBUG - #undef DB_LEVEL - #define DB_LEVEL 0 -#endif - -/* Some db macros can be made optional dependent on the setting of the - * global variable db_option by appending _opt e.g. db_assert_opt(). The - * only code that is executed for any _opt macro if db_option is zero is - * - * if(db_option) - * - * However, this is still more than the macros controlled by the DB_LEVEL - * - if they are above the current DB_LEVEL they cause no code execution - * whatsoever. Therefore, avoid using _opt type macros inside extremely - * time critical code - use macros contolled by the DB_LEVEL instead, - * unless you are prepared to put up with the speed penalty. - * The only time that _opt type macros generate no code is when NDEBUG is - * defined. - */ - -/* S T A R T W R A P P E R ****************************************** */ - -/* Avoid multiple inclusions of this file in a single source file. */ -#ifndef DB_H_INCLUDED -#define DB_H_INCLUDED - -/* I N C L U D E D S ************************************************** */ -#include "advwin32.h" -#ifndef DB_NOWINDOWS - #include - #include "advwin32.h" -#endif - -/* Permit use in a C++ source file. */ -#ifdef __cplusplus -extern "C" { -#endif - -/* ******************************************************************** * - * * - * I N T E R F A C E - both internal and external. * - * * - * ******************************************************************** */ - -/* C O N S T A N T S ************************************************** */ - -/* Possible values for the global variable, db_display_type. */ -#define DB_DOS 0 -#define DB_WINDOWS 1 -#define DB_DIRECTDRAW 2 - -/* Possible values for the bltOrFlip field of db_dd_mode_tag structure. */ -#define DB_FLIP 0 -#define DB_BLT 1 - -/* M A C R O S ******************************************************** */ - -#if (!defined(DB_NOASSUME)) && defined(_MSC_VER) && (_MSC_VER >= 1200) - #define _db_assume(x) __assume(x) -#else - #define _db_assume(x) ((void)0) -#endif - -#if DB_LEVEL >= 1 - /* Fn like macro. */ - #define db_set_mode(md, miP) db_set_mode_ex(md, miP, NULL) - #define db_set_log_file(strP) db_set_log_file_ex(strP) -#else - #define db_set_mode(md, miP) ((void) 0) - #define db_set_log_file(strP) ((void) 0) -#endif - -/* Final use macros after testing of DB_LEVEL / db_option. */ -#define db_assert_final(expr) \ - ((expr) ? ((void) 0) : db_assert_fail(#expr, __FILE__, __LINE__)) - -/* Macros whose compilation is conditional on the value of DB_LEVEL. */ -#if DB_LEVEL >= 1 - #define db_assert1(expr) db_assert_final(expr) - #define db_onlyassert1(expr) db_assert_final(expr) - #define db_verify1(expr) db_assert_final(expr) - #define db_print1(x, y, strP) db_print_fired(x, y, strP) - #define db_msg1(strP) db_msg_fired(strP) - #define db_log1(strP) db_log_fired(strP) - #define db_code1(code) code - #define db_printf1(params) db_printf_fired params - #define db_msgf1(params) db_msgf_fired params - #define db_logf1(params) db_logf_fired params -#else - #define db_assert1(expr) _db_assume(expr) - #define db_onlyassert1(__ignore) ((void) 0) - #define db_verify1(expr) (expr) - #define db_print1(x, y, __ignore) ((void) 0) - #define db_msg1(__ignore) _db_assume(0) - #define db_log1(__ignore) ((void) 0) - #define db_code1(__ignore) - #define db_printf1(x, y, __ignore) ((void) 0) - #define db_msgf1(__ignore) _db_assume(0) - #define db_logf1(__ignore) ((void) 0) -#endif -#if DB_LEVEL >= 2 - #define db_assert2(expr) db_assert_final(expr) - #define db_onlyassert2(expr) db_assert_final(expr) - #define db_verify2(expr) db_assert_final(expr) - #define db_print2(x, y, strP) db_print_fired(x, y, strP) - #define db_msg2(strP) db_msg_fired(strP) - #define db_log2(strP) db_log_fired(strP) - #define db_code2(code) code - #define db_printf2(params) db_printf_fired params - #define db_msgf2(params) db_msgf_fired params - #define db_logf2(params) db_logf_fired params -#else - #define db_assert2(expr) _db_assume(expr) - #define db_onlyassert2(__ignore) ((void) 0) - #define db_verify2(expr) (expr) - #define db_print2(x, y, __ignore) ((void) 0) - #define db_msg2(__ignore) _db_assume(0) - #define db_log2(__ignore) ((void) 0) - #define db_code2(__ignore) - #define db_printf2(x, y, __ignore) ((void) 0) - #define db_msgf2(__ignore) _db_assume(0) - #define db_logf2(__ignore) ((void) 0) -#endif -#if DB_LEVEL >= 3 - #define db_assert3(expr) db_assert_final(expr) - #define db_onlyassert3(expr) db_assert_final(expr) - #define db_verify3(expr) db_assert_final(expr) - #define db_print3(x, y, strP) db_print_fired(x, y, strP) - #define db_msg3(strP) db_msg_fired(strP) - #define db_log3(strP) db_log_fired(strP) - #define db_code3(code) code - #define db_printf3(params) db_printf_fired params - #define db_msgf3(params) db_msgf_fired params - #define db_logf3(params) db_logf_fired params -#else - #define db_assert3(expr) _db_assume(expr) - #define db_onlyassert3(__ignore) ((void) 0) - #define db_verify3(expr) (expr) - #define db_print3(x, y, __ignore) ((void) 0) - #define db_msg3(__ignore) _db_assume(0) - #define db_log3(__ignore) ((void) 0) - #define db_code3(__ignore) - #define db_printf3(x, y, __ignore) ((void) 0) - #define db_msgf3(__ignore) _db_assume(0) - #define db_logf3(__ignore) ((void) 0) -#endif -#if DB_LEVEL >= 4 - #define db_assert4(expr) db_assert_final(expr) - #define db_onlyassert4(expr) db_assert_final(expr) - #define db_verify4(expr) db_assert_final(expr) - #define db_print4(x, y, strP) db_print_fired(x, y, strP) - #define db_msg4(strP) db_msg_fired(strP) - #define db_log4(strP) db_log_fired(strP) - #define db_code4(code) code - #define db_printf4(params) db_printf_fired params - #define db_msgf4(params) db_msgf_fired params - #define db_logf4(params) db_logf_fired params -#else - #define db_assert4(expr) _db_assume(expr) - #define db_onlyassert4(__ignore) ((void) 0) - #define db_verify4(expr) (expr) - #define db_print4(x, y, __ignore) ((void) 0) - #define db_msg4(__ignore) _db_assume(0) - #define db_log4(__ignore) ((void) 0) - #define db_code4(__ignore) - #define db_printf4(x, y, __ignore) ((void) 0) - #define db_msgf4(__ignore) _db_assume(0) - #define db_logf4(__ignore) ((void) 0) -#endif -#if DB_LEVEL >= 5 - #define db_assert5(expr) db_assert_final(expr) - #define db_onlyassert5(expr) db_assert_final(expr) - #define db_verify5(expr) db_assert_final(expr) - #define db_print5(x, y, strP) db_print_fired(x, y, strP) - #define db_msg5(strP) db_msg_fired(strP) - #define db_log5(strP) db_log_fired(strP) - #define db_code5(code) code - #define db_printf5(params) db_printf_fired params - #define db_msgf5(params) db_msgf_fired params - #define db_logf5(params) db_logf_fired params -#else - #define db_assert5(expr) _db_assume(expr) - #define db_onlyassert5(__ignore) ((void) 0) - #define db_verify5(expr) (expr) - #define db_print5(x, y, __ignore) ((void) 0) - #define db_msg5(__ignore) _db_assume(0) - #define db_log5(__ignore) ((void) 0) - #define db_code5(__ignore) - #define db_printf5(x, y, __ignore) ((void) 0) - #define db_msgf5(__ignore) _db_assume(0) - #define db_logf5(__ignore) ((void) 0) -#endif - -/* Macros which fire if db_option is non-zero (and NDEBUG is not - * defined). - */ -#ifndef NDEBUG - #define db_assert_opt(expr) if(db_option) db_assert_final(expr) - #define db_onlyassert_opt(expr) if(db_option) db_assert_final(expr) - #define db_verify_opt(expr) ((db_option) ? db_assert_final(expr) : (expr)) - #define db_print_opt(x, y, strP) if(db_option) db_print_fired(x, y, strP) - #define db_msg_opt(strP) if(db_option) db_msg_fired(strP) - #define db_log_opt(strP) if(db_option) db_log_fired(strP) - #define db_code_opt(code) if(db_option) code - #define db_printf_opt(params) if(db_option) db_printf_fired params - #define db_msgf_opt(params) if(db_option) db_msgf_fired params - #define db_logf_opt(params) if(db_option) db_logf_fired params -#else - #define db_assert_opt(expr) _db_assume(expr) - #define db_onlyassert_opt(__ignore) ((void) 0) - #define db_verify_opt(expr) (expr) - #define db_print_opt(x,y,__ignore) ((void) 0) - #define db_msg_opt(__ignore) _db_assume(0) - #define db_log_opt(__ignore) ((void) 0) - #define db_code_opt(code) - #define db_printf_opt(params) ((void) 0) - #define db_msgf_opt(params) _db_assume(0) - #define db_logf_opt(params) ((void) 0) -#endif - -/* Macros for setting and getting db_option. */ -#ifndef NDEBUG - #define db_option_set(status) db_option = (status) - #define db_option_on() db_option = 1 - #define db_option_off() db_option = 0 - #define db_option_get() (db_option) -#else - #define db_option_set(__ignore) ((void) 0) - #define db_option_on() ((void) 0) - #define db_option_off() ((void) 0) - #define db_option_get() (0) -#endif - -/* T Y P E S ********************************************************** */ - -struct db_dd_mode_tag -{ - void *directDrawP; - void *visibleSurfaceP; - void *drawSurfaceP; - int width, height, bitsPerPixel; - unsigned short foreCol, backCol; - int bltOrFlip; - int bltXOffset, bltYOffset; -}; - -/* P R O T O S ******************************************************** */ - -/* Don't prototype anything or declare globals if NDEBUG is defined. */ -#ifndef NDEBUG - -/* New formatted debugging fns. */ -extern void __cdecl db_logf_fired(const char *fmtStrP, ...); -extern void __cdecl db_printf_fired(int x, int y, const char *fmtStrP, ...); -extern void __cdecl db_msgf_fired(const char *fmtStrP, ...); - -/* Called whenever an assertion fails. */ -extern void db_assert_fail(const char *exprP, const char *fileP, int line); - -/* Displays a message and has the program pause until the user responds - * to it. - */ -extern void db_msg_fired(const char *strP); - -/* Displays a message (on platforms that support positioning, at (x, y)) - * and continues program execution immediately. - */ -extern void db_print_fired(int x, int y, const char *strP); - -/* Writes a message to a log file. */ -extern void db_log_fired(const char *strP); - -/* Deletes the old log file, so that the log file only contains messages - * saved from this point on. Use ONCE at the start of any program that - * uses any of the db_log macros. - */ -extern void db_log_init(void); - -/* Gets the current infomation needed for the display mode. Used to enable - * other code to use the same debugging stuff. The return value is modeInfoP - */ -extern int db_get_mode(void **modeInfoPP, void **FontPP); - -/* Changes the log file name */ -extern void db_set_log_file_ex(const char *strP); - -/* Sets the display mode for the debugging functions to use. mode must - * be one of DB_DOS, DB_WINDOWS or DB_DIRECTDRAW. The modeInfoP parameter - * is NULL except for Direct Draw. The Last parameter can be NULL. - */ -extern void db_set_mode_ex(int mode, void *modeInfoP, void *newFontP); - -/* Called to set whether exceptions or brakepoints are called. */ -extern void DbUseBrakepoints(BOOL use_brakepoints); - -/* Call this to de-allocate memory used to store the debugging font. This - * fn does nothing unless you are in DirectDraw mode, since this is the - * only mode which loads its own font. Calling this fn is not strictly - * necessary since the OS will de-allocate a process' outstanding dynamic - * memory allocations when it ends anyway. However, calling this fn is - * cleaner and avoids BoundsChecker hits. - */ -extern void db_uninit(void); - - /* G L O B A L S ****************************************************** */ - -/* Should we expand _opt type macros? */ -extern int db_option; - -#endif /* of #ifndef NDEBUG */ - -/* E N D W R A P P E R ********************************************** */ - -/* Permit use in a C++ source file. */ -#ifdef __cplusplus -} -#endif - -/* Avoid multiple inclusions of this file in a single source file. */ -#endif -- cgit v1.3